CARING FOR YOUR ANODIZED PARTS
When caring for your anodized BT products it is important that you never use a wash that is phosphate based. Never use waxes or Windex or any other type of glass cleaner on your anodized parts.
We
recommend mineral oil when cleaning any of your anodized parts, be it
under hood products, badges, center caps or any other anodized BT part
that is exposed to heat, elements, or sunlight.
Before
you begin cleaning your parts, please take great care to remove any
debris that may be present on them such as light dirt. We suggest a
microfiber cloth to lightly wipe down the products first. After you
ensure that all dirt has been removed apply just enough mineral oil on a
clean microfiber cloth. Lightly wipe Your items back and forth or side
to side in one direction only. When you have a light coat on, take a
clean microfiber cloth that has not been used and wipe dry. You may
also use WD40 or Boeshield to clean your anodized items also.
CARING FOR YOUR POLISHED PARTS
It
is very important that you check your polished BT parts frequently
especially all under hood items and exterior items such as wheel center
caps or badges. Polish is not chrome plate in any way. The 6061-T6 has
been highly polished to give you the mirror type look.
Inspect
your BT parts for any small dirt particles. Once your have done this
we recommend you remove the caps and and dip them in light soap and
water (we recommend Dawn Dish Detergent). Remove and inspect to be sure
that all dirt particles are removed. Lightly dry your parts with
microfiber cloth doing son in once direction to the tool grain. to
remove any water spots. Once complete dry we recommend Bling Master or
Mothers Billet Wax to re-polish as needed. Be sure to use a soft
microfiber cloth and polish in one direction to the grain of the tool.
If
your BT parts are in need of a total polish refurbish please contact us
for details on how we may be able to help offer this service to you.
CARING FOR YOUR SATIN PARTS
Satin
parts are an off the machine finish. Sometimes our parts are mistaken
for "polish" due to the proprietary nature by which we machine our
parts. If you see tool grains on your parts going on one direction this
is normal as that is the tool path you are seeing.
When
caring for your satin parts, especially your under hood items, we also
recommend you remove them and dip them in light soap and water (we
recommend Dawn). Once you have insured that the parts are free of dirt
dry them immediately to prevent water spots. If water spots are
present on your parts use a Mr. Clean Magic Eraser (do not use the
generic brands as they do not work well from our experience) and lightly
rub off the spot to the tool grain. Do not put force just a light back
and fourth normally will remove the spots.
Once
all dirt is removed you may use mineral spirits and clean your parts in
one direction with the tool grain. There is no need to put force into
this. You can also use mineral oil as well. Let your parts dry and
then you may wipe them down with a clean dry cloth and reinstall.
All of our anodized products are warranted for 90 days from receipt as long as proper care has been maintained above.
All
satin products are warranted for one year from manufacturing defect
only. Notify us immediately if your finishes are defective when
unpacking your box.
We cannot warranty polish due to the nature of the finish. We can only offer our suggestions for keeping that finish clean.
New Products
