Speedlogix Front Strut Tower Brace 2005-2020 Challenger/Charger/300/Magnum

Home > Shop by Vehicle > Challenger > Suspension > Strut & Shock Tower Braces >

More Images:

Speedlogix Price: $329.88

Sale Price: $279.00 + Free Shipping (US48)

You save $50.88!

Price with Selected Options: $279.00

Product Code: SX-306-5011

Vehicle*:
		Click to view another Finish / Color
Finish / Color*:

Qty:

Product Description

Benefits:

- Made from 4130 Chrome-moly Steel
- Each piece is precision welded
- Closed triangle shape for strength and ultimate handling
- Improved Steering response
- No need to cut the underhood liner
- Fits 5.7L with intake cover
- Fits 6.4L (392), 6.1L, 2.7L, 3.5L, and 3.6L
- Fits all Supercharged Applications (except Demon, Hellcat, Kenne Bell 4.2, Kenne Bell 3.6 with KB Throttle Body)
- Comes pre-drilled for all factory wire harnesses
- Fits all Shaker Hood Configurations

Standard color is black wrinkle powder coat. We try to keep the optional powder coat colors in stock, but they may take 1-2 weeks to have made if not in stock. Call us 561-687-3712 or email us help@speedlogix.net to verify before ordering if you are in a time crunch. We don't charge your credit card until your order ships.

In order to use stock strut caps they will require trimming to fit while aftermarket strut caps you will need to use silicone to attach the small caps.

Installation Tips

4.5 of 5 Total Reviews: 195 Write a review.

0 of 0 people found the following review helpful:

Excellent!	November 17, 2020
Reviewer: Jason Miller from Pasco, WA United States

I purchased the strut brace for my Challenger in Hemi Orange. Came in perfect condition, solid construction and beautiful! Haven’t tested performance yet as I am waiting to finish my suspension upgrades. I recommend this product! Wish I could submit a photo.

Was this review helpful to you?

0 of 0 people found the following review helpful:

2016 Challenger Scat Pack	November 17, 2020
Reviewer: Marc from Naugatuck, CT United States

Somewhat satisfied. The holes for the struts were misaligned and I had to force the bar on. The last drivers side cowl pin hole didn't align so I had to drill my own hole to get the pin in otherwise the cowl was pulled off of the windshield.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Love the design, but powdercoat is horrible	October 18, 2020
Reviewer: Ernie D from Norwalk, CA United States

I love the design, but powdercoat cracked halfways through tightening the bolts. I have serious concerns that the paint will last but I needed a strut tower brace that is out of the way since my last 2 have had clearance issues as I've gone through my build. This is my third strut tower brace and by far the worst paint job so I'm just hoping the welds don't crack.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Front strut tower brace	July 3, 2020
Reviewer: Dennis Lanzetta from Brewster, MA United States

I’m really impressed with the construction and wields of the brace as well as the accuracy of the bolting points , push in clips and the overall fit. I did also install the rear strut brace. The combination of the two braces made a noticeable difference in the handling and reduced body roll. I would highly recommend!

Was this review helpful to you?

0 of 0 people found the following review helpful:

Slightly unaligned	June 5, 2020
Reviewer: Jeremy

The looked to be very good quality. Install would have been a breeze but the mounting points to the strut tower did not align properly. Had to use some strength to get the holes over the threads then used the nuts to pull the bar into place on both sides. Car definitely handles better with a slight less amount of body roll

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Shop by Vehicle > Challenger > Suspension > Strut & Shock Tower Braces
Shop by Vehicle > Charger > Suspension > Strut & Shock Tower Braces
Shop by Brand > Speedlogix