|
|
|
|
|
|
DiabloSport Trinity 2 1/16 Gauge Pod Mount
|
Our Price: $24.88
|
|
|
The DiabloSport Trinity Gauge Pod Mount is a universal mount specifically designed to fit any 2 1/16th gauge pod. The Gauge Pod Mount locks into the back of the Trinity and allows a full 360 degree adjustment.
Full 360 Degree adjustability
Fits all 2 1/16th gauge pods
Slides easily onto the back of the Trinity and "locks" in place
Hides Cable for a clean install
|
|
|
|
|
|
|
|
|
|
DiabloSport Trinity Right Angle OBD2 Cable
|
|
Our Price: $24.88
|
|
|
Does your Trinity cable interfere with your driving? If so The DiabloSport Trinity Right Angle OBD2 Cable is what you need. This cable provides a 90 degree OBD2 end to give you some freedom under your vehicle's dash. Please check the configuration of your OBD2 port because this cable might not fit all applications.
The DiabloSport T1025 right angle OBD-II connector is an accessory for use with the Trinity T1000. This optional cable will allow certain types of vehicles a cleaner mounting solution. On other applications the T1025 right angle will not fit at all, some examples would be a Magnum or 300C. On other vehicles the T1025 will create a much cleaner install (such as Dodge Cummins of Ford PowerStrokes).
|
|
|
|
|
|
|
|
|
|
AeroForce 5v regulated power supply
|
|
Our Price: $25.88
|
|
|
Simply connects to switched 12v and ground tosupply 5v to our sensor kits. Eliminates the need to tap into other sensor wires or the PCM.
|
|
|
|
|
|
|
|
|
|
AeroForce Temperature Sensor Kit
|
|
Our Price: $44.88
|
|
|
Each kit consists of a sensor, signal conditioner, and connector/pigtail allowing you to connect directly to the Interceptor gauge. These accurate sensors are OEM units and are available for use for fluid or air temperature.
Please add int he customer notes which version you want, fluid or air.
|
|
|
|
|
|
|
|
|
|
AeroForce GM style 2 Bar MAP with connector/pigtail
|
|
Our Price: $55.88
|
|
|
The sensor kits are OEM quality units with 0-5v outputs which are compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.
|
|
|
|
|
|
|
|
|
|
AeroForce 150 psi Fuel / Oil Pressure Sensor Kit
|
|
Our Price: $65.88
|
|
|
The sensor kits are OEM quality units with 0-5v outputs which are
compatible with our gauges. For those who already have an Aeroforce gauge
these provide an inexepensive and easier alternative to buying and installing
separate gauges for these functions.
These sensors have a range of 150 psi and come with the proper mating connector
and pigtail. They have a 3/8" Male NPT fitting.
We also carry steel and aluminum adapters to help with installation.
|
|
|
|
|
|
|
|
|
|
AeroForce GM style 3 Bar MAP with connector/pigtail 29 psi
|
|
Our Price: $67.88
|
|
|
The sensor kits are OEM quality units with 0-5v outputs which are compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.
|
|
|
|
|
|
|
|
|
|
AeroForce Type K EGT pyrometer
|
|
Our Price: $69.88
|
|
|
Aeroforce Technology has designed a thermocouple amplifier/linearizer that converts the very low and non-linear output of a type K thermocouple (EGT pyrometer) to a linear 0-5v signal. This allows our gauges as well as other data loggers to read EGT temperatures. An EGT sensor with an ungrounded tip is necessary to work properly with this unit. We sell these type of EGT sensors as well. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.
These pyrometers use an ungrounded tip type K thermocouple for maximum accuracy. They come
with a 6' cable, weld in type bung, and 1/8" NPT fitting. Clamp style hardware also available as
special order.
|
|
|
|
|
|
|
|
|
|
Innovate Analog Air/Fuel Ratio Gauge for LC-1 / LM-1
|
|
Our Price: $98.88
|
|
|
**Gauge Only**
This gauge can be purchased as an accessory to be used with the LC-1 or LM-1. These kits includes the DB Gauge, mounting hardware, CD and quick-start guide.
|
|
|
|
|
|
|
|
|
|
AeroForce 7+ Bar MAP with 12" pigtail 85 psi
|
|
Our Price: $98.88
|
|
|
The sensor kits are OEM quality units with 0-5v outputs which are compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.
|
|
|
|
|
|
|
|
|
|
AeroForce 2000 psi Nitrous Sensor
|
|
Our Price: $98.88
|
|
|
The nitrous sensor listed below are high accuracy units with 0.5 to 4.5v output which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Sensor has a 1/8" NPT fitting.
|
|
|
|
|
|
|
|
|
|
AeroForce Thermocouple amplifier/linearizer
|
|
Our Price: $99.88
|
|
|
Aeroforce Technology has designed a thermocouple amplifier/linearizer that converts the very low and non-linear output
of a type K thermocouple (EGT pyrometer) to a linear 0-5v signal. This allows our gauges as well as other data loggers
to read EGT temperatures. An EGT sensor with an ungrounded tip is necessary to work properly with this unit. We sell
these type of EGT sensors as well. For those who already have an Aeroforce gauge these provide an inexepensive
and easier alternative to buying and installing separate gauges for these functions.
These units have conversion accuracy of +/- 4 deg F between 400 and 1600 deg. F. Click here to see the accuracy specifications. Unit easily connects to the Interceptor scan gauge or other data logging device and includes instructions with linear conversion values.
|
|
|
|
|
|
|
|
|
|
Aeroforce Wideband Air/Fuel Kit
|
|
Our Price: $189.88
|
|
|
The Aeroforce wideband air/fuel kit comes with the following:
Digital 12 volt Wideband Controller Unit LSU4.9 Wideband Oxygen Sensor 10 ft. Sensor Wire Harness 5 ft. Control Unit to Gauge Wire Harness 5 ft. Power Wire Harness Weld- In Sensor Bung Full instructions and technical support
|
|
|
|
|
|
|
|
|
|
AEM Air/Fuel + Boost Wideband Gauge
|
List Price: $416.25
Our Price: $329.88
You save $86.37!
|
|
|
Wideband Air/Fuel & Boost in One Gauge!
New from AEM Electronics is their Wideband FAILSAFE Gauge. The Wideband FAILSAFE Gauge is a UEGO controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.
In addition, the system contains an on-board data logger for logging over three hours of data recording (20 Hz per parameter) of AFR, RPM, boost, alarm, and others. Data logs can be downloaded for viewing in the new AEMdata software. Once installed, users connect to the gauge via a USB port and use the supplied software to log an engine’s safe AFR operating range, set minimum and maximum AFR ranges, alarm mode, time delay strategy, failsafe strategy and gauge display configuration.
-------------------------------
The Wideband FAILSAFE Gauge provides the ability to accurately tune AFR, while actively protecting your engine by constantly monitoring AFR curves and activating a user-defined failsafe strategy if it runs lean.
The Wideband FAILSAFE Gauge is a Universal Exhaust Gas Oxygen (UEGO—“you-way-go”) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.
WHY YOU WANT ONE
This product is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this FAILSAFE device.
WHAT IT DOES
After the engine is tuned and a safe operating window of AFR is established, the Wideband FAILSAFE Gauge continually monitors AFR and boost or vacuum to make sure that AFR does not fall out of the defined operating window at a given boost or vacuum level. If the Wideband Failsafe detects an out of range AFR reading, the gauge triggers a low side output (ground signal with a 1.5 amp draw max) that can save your engine from catastrophic damage.
Use the gauge’s intuitive software to configure the low side output, create a user-adjustable time delay strategy to prevent false alarms, and customize the gauge lighting to flash and alert the driver if an alarm is triggered.
EXAMPLE ENGINE PROTECTION STRATEGIES
NATURALLY ASPIRATED, TURBOCHARGED OR SUPERCHARGED WITH STAND ALONE EMS OR PIGGYBACK CONTROLLER: Use the low side output to cut revs, retard timing, trigger a separate fuel or ignition map and activate an ancillary warning light. Users with turbos can also trigger the device to cut boost (may require separate solenoid). The aforementioned strategies are provided as an example. Available failsafe strategies will ultimately be dependent on the capability of the EMS or piggyback engine controller.
ON-BOARD DATA LOGGER
The system contains an on-board data logger for logging over three hours of data recording (20 Hz per parameter) of AFR, RPM, boost, alarm, and others. Data logs can be downloaded for viewing in the new AEMdata software.
WHAT IT INCLUDES
The 52mm (2-1/16”) Wideband FAILSAFE Gauge includes a Bosch 4.2LSU AFR wideband sensor for monitoring and feedback of AFR and an on-board boost sensor to read vacuum or boost pressures up to 29 PSIG. Both boost and AFR can be displayed in real time on the gauge’s face using the full color OLED screen and 24 three-color sweeping LEDs. The gauge includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window (example strategies below), and an RPM input to log RPM for tuning purposes.
EASY TO SET UP!
Once installed, users connect to the gauge via a USB port and use the supplied software to log an engine’s safe AFR operating range, set minimum and maximum AFR ranges, alarm mode, time delay strategy, failsafe strategy and gauge display configuration.
Users with an AEMnet-equipped (CAN bus) device can daisy chain the Wideband FAILSAFE gauge using the AEMnet connection (adapter sold separately). Non AEMnet devices can communicate with the device using the CAN 2.0B spec protocol. An analog output for O2 feedback is provided for users without AEMnet or CAN-equipped devices to hard wire the gauge for O2 feedback or logging in a stand-alone logger.
WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power and fuel economy, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency.
The Wideband FAILSAFE Gauge is an ideal engine tuning tool. The highly accurate Bosch AFR wideband sensor is maintenance free and never requires free-air calibration, enabling you to fine tune AFR from an AEM programmable engine management system, any other programmable EMS or piggyback programmer. For carbureted applications, it can tell you when it’s time to swap carb(s), change jets or simply modify fuel pressure.
WIDEBAND FAILSAFE GAUGE FACEPLATE STYLES:
Kit comes with 6 different faceplates and black and silver bezels.
Black and White AFR in sweeping LEDs
Black and White Vacuum/Boost in sweeping LEDs
Black Vacuum only in sweeping LEDs
Black Lambda in sweeping LEDs
WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES:
Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
No free air calibration required – ever
Internal boost sensor
Bosch Wideband UEGO sensor and weld-in bung included
On-Board 3+ hour Datalogging capability at 20hz per parameter
Full color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR)
Intuitive set up software
Interchangeable faceplates and bezels (see options, above)
Data analysis using AEMdata software
WIDEBAND FAILSAFE GAUGE INSTALLATION FEATURES:
AEMnet compatible (CAN 2.0)
Differential AFR analog output
Differential boost analog output
Configurable RPM input for logging
One low-side driver output (Ground with 1.5 amp max draw)
Positive-lock connectors
Tunable PC-based software with USB connectivity
Time based reset for outputs
|
|
|
|
Today's Deal