|
|
|
|
|
|
Speedlogix Carbon Fiber Cold Air Intake Kit 11-13 Challenger, Charger, 300 392/6.4L
|
|
Our Price: $249.88
|
|
|
Speedlogix Carbon Fiber Cold Air Intake Kit for the 2011-2013 Challenger, Charger, 300 with the 392 / 6.4L HEMI engine.
GAIN: 11 RWHP (dyno proven by 3rd party)
Our kit includes the following:
- 4” Carbon Fiber Tube
- Speedlogix Air Filter
- Breather Filter
- High Temperature Silicone Couplers and Required Hardware
|
|
|
|
|
|
|
|
|
|
K&N 63 Series AirCharger CAI 11-12 Challenger, Charger, 300 6.4L/392
|
|
Our Price: $291.88
|
|
|
A sister product to our 57 Series FIPK, our 63 Series AirCharger® Intake Kits are guaranteed to increase horsepower and come with a Million Mile Limited Warranty. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and reusable. Most of our intake kits are relatively easy to install using tools commonly available (see installation instructions). 63 Series Intakes are street legal in most states. They are not legal for use in California and other states adopting California emission standards
|
|
|
|
|
|
|
|
|
|
K&N Typhoon CAI 11-12 Challenger, Charger, 300 6.4L/392 SRT8
|
|
List Price: $449.00
Our Price: $291.88
You save $157.12!
|
|
|
Built for performance and show, the 69 Series Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Some Typhoon's have high quality finish options including polished aluminum, powder coated red, and powder coated silver among others. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction resulting in additional power and torque. All of them come with a Million Mile Limited Warranty and are guaranteed to increase horsepower. Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website vehicle parts search for specific CARB status.
|
|
|
|
|
|
|
|
|
|
LMI Fender Mount Cold Air Intake 11-13 Challenger, Charger, 300 392/6.4L
|
|
Our Price: $374.88
|
|
|
o Fender mounted filter for true cold air induction
o 4” diameter carbon fiber tubes
o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow
o Hi-temp silicon couplers
o S&B Filter with 8 layer protection (oil type)
o High quality “T”-bolt band clamps
o Oil breather filter (red,blue,silver)
o 9” IAT extension harness INCLUDED to relocate sensor
o All necessary hardware and instruction for DIY installation
|
|
|
|
|
|
|
|
|
|
aFe Magnum FORCE Stage 2 Intake System PRO DRY S 11-12 Challenger, Charger, 300
|
|
Our Price: $379.88
|
|
|
This Stage 2 cold air intake system produces 18 max horsepower, 22lbs. x ft. torque and out-flowed the factory intake by 32%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable "oiled" conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Note: This product will be shipping June 30.
Silicone Throttle Body Adaptor � A silicone throttle body adapter is included for a durable connection with a flawless seal over the life of the intake system.
6" 360 Degree Air Filter � A cone 360 degree round air filter is used for maximum flow and performance filtration (98.6% efficient). The patented PRO 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.
High quality T-Bolt clamp � Included in this kit is a constant tension T-bolt clamps to insure a tight and secure installation
Hassle-Free Installation � aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
This System Fits:
Dodge Challenger SRT8 11-12 V8-6.4L
Dodge Charger SRT8 11-12 V8-6.4L
Chrysler 300 SRT8 11-12 V8-6.4L
|
|
|
|
|
|
|
|
|
|
Mopar Cold Air Intake 11-12 Challenger, Charger, 300 392/6.4L
|
|
List Price: $409.00
Our Price: $387.88
You save $21.12!
|
|
|
Looking for a Cold Air Intake for your 392 Challenger or your 6.4L Charger or 300? This is the Mopar Performance kit!
|
|
|
|
|
|
|
|
|
|
aFe Magnum FORCE Stage 2 Intake System PRO 5R 11-12 Challenger, Charger, 300 392/6.4L
|
|
Our Price: $389.88
|
|
|
This Stage 2 cold air intake system produces 18 max horsepower, 22lbs. x ft. torque and out-flowed the factory intake by 32%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable "oiled" conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Note: This product will be shipping June 30.
Silicone Throttle Body Adaptor � A silicone throttle body adapter is included for a durable connection with a flawless seal over the life of the intake system.
6" 360 Degree Air Filter � A cone 360 degree round air filter is used for maximum flow and performance filtration (98.6% efficient). The patented PRO 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.
High quality T-Bolt clamp � Included in this kit is a constant tension T-bolt clamps to insure a tight and secure installation
Hassle-Free Installation � aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
This System Fits:
Dodge Challenger SRT8 11-12 V8-6.4L
Dodge Charger SRT8 11-12 V8-6.4L
Chrysler 300 SRT8 11-12 V8-6.4L
|
|
|
|
|
|
|
|
|
|
Speedlogix inTune + CAI Package 11-12 Challenger, Charger, 300, Jeep 392 / 6.4L
|
|
List Price: $699.76
Our Price: $589.88
You save $109.88!
|
|
|
- Diablosport inTune Handheld Tuner
- Speedlogix Carbon Fiber Cold Air Intake
|
|
|
|
|
|
|
|
|
|
Speedlogix Trinity Tuner + Cold Air Intake Package 11-12 Challenger, Charger, 300, Jeep 392/6.4L
|
|
List Price: $848.88
Our Price: $699.88
You save $149.00!
|
|
|
- Diablosport Trinity Handheld Tuner
- Speedlogix Carbon Fiber Cold Air Intake
Free Ground Shipping to the US48
|
|
|
|
New Products