Speedlogix "S" Mount Dual Chamber Billet Oil Catch Can
Free ground shipping to the US48 with discounted shipping for all other areas.
Made from T-6061 aluminum and professionally engineered and CNC machined.
-Billet Dual Chamber Top
-Billet Reservoir Bottom with Textured Easy-Grip
-Stainless Wire Mesh
-Unique Machined Billet Screen
-Billet "S" Mount
-Billet 90 Degree Elbow Fittings
Our catch can comes fully assembled and ready to install on your HEMI engine.
If you choose to use this on your 5.7L HEMI, please note that you will not be able to reuse your stock engine cover.
Made in West Palm Beach, Florida, USA
Speedlogix Price: $119.88 w/ Free US48 Shipping
Moroso Catch Can w/ Drain 2009-2017 5.7L RAM
*Please note: May not apply to all kits
- Plumbed into a vehicle's PCV system to capture the excess crankcase vapors, residual oil mist and moisture from reentering the intake tract
- Vehicles from the factory vent these excess crankcase vapors, residual oil mist and moisture right back into the intake manifold which could cause detonation, oil deposits to form in the intake tract including the valves themselves and from lowering the efficiency of the intercooler in intercooler equipped vehicles
- Increases engine performance from cleaner intake air
- Air-Oil Separators have billet aluminum bodies with internal baffling and mesh media
- Includes heavy duty brass inlet and outlet fittings, Fuel/Emission/PCV Vapor hose, stainless steel mounting bracket and billet aluminum mounting clamp for the body of the separator
- Some Vehicle crankcase ventilation systems require that 2 Air-Oil Separator bodies be used to properly capture and ventilate the system
Moroso Air-Oil Separators are available in 2 sizes, not all kits are available with both size body, please see Air-Oil Separator Application Chart for details
Air-Oil Separator Kits, Large Body
- The original size, 43% more capacity than the Small Body Version
- Features a bottom drain with elbow that makes draining the collected oil virtually mess-free
- Polished body can be chromed, painted, or powder coated for a custom look
- Air-Oil Separator Kits, Small Body
- Smaller size fits in more applications and some customers prefer the smaller size body
- Two piece body unscrews for draining
Speedlogix Price: $184.88
LMI Short Ram Intake 2009-2017 5.7L RAM
LMI 4" Carbon Fiber Cold Air Intake for 2009 - Present Ram Truck 5.7 Hemi
Fits 2009 - Present Ram Truck 5.7 HEMI
- Carbon Fiber construction
- 4 inch diameter
- Unique fabrication process resulting in smooth inner surface to ensure smooth airflow
- S&B Filter with 8 layer protection (oil type)
- Silicon coupler made of 4 ply construction for long term durability
- High quality “T”-bolt band clamps
- Available to fit both stock and 90mm throttle bodies
- Drilled for IAT sensor with rubber grommet for secure fit
- All necessary hardware and instruction for DIY installation
$25.00 Shipping to the US48
LMI Minimum Advertised Price: $249.99
Speedlogix Price: $249.99 + $25 US48 Shipping
DiabloSport Jammer CAI 2009-2017 5.7L RAM 1500
Jammer cold air intake system delivers 17 max horsepower, 17 lb-ft. torque on
your Hemi equipped Ram. This kit will outflow the factory intake by 40%.
Included in this cold air intake system kit is a 18 gauge powder-coated heat
shield, a massive 8" tall, oil-free, dry filter, and a CAD designed,
rotomolded intake tube. This is a direct bolt-on kit and requires no cutting or
drilling. Let your HEMI breathe and enjoy optimized power and efficiency with
the Jammer gas intake.
The Jammer intake system pairs perfectly with the inTune i3, Predator 2, and
Trinity product lines.
This product is 50 state legal for the 2013 model year applications. All
remaining coverage is in a pending status with the California Ari Resource
does the Jammer Cold Air Intake Work?
Factory intake systems
are designed to muffle the engine noise and provide some air filtration.
However, they miss the critical component that the intake serves as a
performance part that can provide efficient filtration, cooler air charge, and
great looks. The Jammer cold air intake offers an easy to install solution to
provide cooler air at a faster rate without sacrificing filtration. The cooler
air charge basically equates to more oxygen and more performance.
increase that the Jammer Intake adds, doesn’t have to be just about raw power
improvement as mileage performance can be improved as well by having a cooler
air charge. With more power potential, cooler air charge and mileage
improvement potential, the Jammer Intake is a no-brainer when it comes to bolt
on upgrades for your ride.
Add a Gas Intake?
The key to knowing
whether or not the Jammer Intake is good for your and your ride is to
understand the benefits that come with the kit and the quality of the kit itself.
We use only premium materials to build the Jammer line as we know that quality
in our products is key. We’ve chosen a design that allows for maximum power
potential, airflow and efficiency. We also focused on building the Jammer to be
affordable so you aren’t breaking the bank when upgrading your ride. Ease of
use, affordable pricing, and instant results are going to be the primary
drivers behind your purchase of the Jammer cold air intake.
instant horsepower and torque
lasting dry filter
air flow velocity
DiabloSport MSRP: $422.95
DiabloSport Minumum Advertised Price: $379.95
Speedlogix Price: $379.95 w/ Free US48 Shipping
You save $43.00!